2014منتدى Vests
Squeaking and creaking noise in Ultra 2 camera support vest during use
مضى على هذا 12 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
موضع خلافاختلف المشاركون ولم يصلوا إلى خلاصة. اقرأ النتائج على أنها مواقف، لا إجابة.
ما توصّل إليه النقاش
- Squeaking typically originates from the socket block or center spar area and becomes more noticeable when the rig is positioned away from the body or during booming movements.
- White lithium grease applied to moving parts can temporarily resolve squeaking.
- ACF-50 lubricant sprayed sparingly on moving parts and wiped off immediately can help eliminate noise.
- Over-frequent cleaning and maintenance may actually increase noise by removing accumulated body oils and residue that naturally quiets the vest.
- Anodized aluminum components are inherently dry and prone to creating noise through slight chafing between the outer and inner center spars when they flex.
- Rubbing chapstick into the dovetail grooves of both center spars is an effective dry lubrication method that does not stain clothing and lasts longer than oil-based products.
- Vests used by multiple operators of different sizes show accelerated squeaking development, particularly in the vertical spar and socket block areas.
- Screws on this model tend to loosen more frequently than on competing products, though this may indicate normal flex points rather than a defect.
يعتمد على
- The squeaking may recur despite cleaning and lubrication, suggesting it is an inherent characteristic of this design.
- Recommendations for maintenance frequency vary widely among users, from monthly to yearly approaches.
- One user switched to a different brand due to persistent noise issues in quiet studio environments, indicating the problem may not be fully solvable on this model.
- No definitive resolution was agreed upon; different lubricants and maintenance approaches worked for different users.