ما توصّل إليه النقاش

• The GLIDECAM GOLD stabilizer has two 12V power output options: a 2-pin accessory connector and a 3-pin camera power port
• The 2-pin accessory connector draws voltage directly from the battery and can supply current draw up to 3 amps or more
• Before connecting any external device to the stabilizer's power outputs, you should verify the power requirements and specifications of the receiving device to prevent damage to sensitive electronics
• Using the 2-pin accessory connector for powering BFD receivers is preferable to using the 3-pin camera power port because it preserves the camera power port for its intended use

يعتمد على

• Information applies specifically to GLIDECAM GOLD model
• The discussion does not specify what BFD unit connector types are required
• Thread does not confirm whether the 3-amp specification is regulated or fluctuating current

المعدات في هذا النقاش

BFD

القطع

Follow Focus

المعدات أو القطع نفسها

1. 2026اسحب التركيز و اقسم نفسك أثناء العمل خاصة على العروض الحيةOperator practice
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest work flow.FacebookSteadicam operators group
3. 2025History of wireless focus and lens control systems for Steadicam®: from cable-based Cinema Products and Seitz to Preston digital, and European solutions by Chrosziel, cmotion, and ARRI.FacebookSteadicam operators group
4. 2025LC-1 (Lens Control-1) follow focus system: wired structure, motors, and early operational experience (1990s).FacebookThe Steadicam Group