2004منتدى Monitors
Distinguishing features and component differences between PRO 1 and PRO 2 monitors
مضى على هذا 22 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- The PRO 1 and PRO 2 monitors share the same housing, monitor tube, functions, and faceplate design.
- ويختلف الإمداد العالي بالطاقة الفولطية بين النماذج، حيث يتضمن البرنامج 2 صيغة أحدث.
- (البرنامج 1) يستخدم فتيلًا خارجيًا بينما يستخدم (برو 2) فتيل حراري داخلي.
- PRO 1 side rails are smooth while PRO 2 side rails have ripples.
- PRO 1 heat sink has 10 ribs while PRO 2 heat sink has two sets of 5 ribs plus a box structure.
- PRO 1 has a fuse receptacle on the left rail near the monitor plug while PRO 2 has no external fuse.
- PRO 1 faceplate is secured with 3 screws while PRO 2 uses 2 screws despite having 3 holes marked on the faceplate sticker.
- PRO 1 units were produced in limited quantity with approximately 50 units made total.
- PRO 1 monitors work only with PRO 1 level equipment while PRO 2 monitors are compatible with both PRO 1 and PRO 2 level equipment.
- Because internal components can be mixed between the two models during repair or upgrade, serial number verification is necessary to confirm the actual specification level of a given monitor.
يعتمد على
- This information is from 2004 and applies to equipment from that era.
- The claim about production quantities is presented as 'supposedly' and may not be precisely verified.
- Components between models are interchangeable, so visual inspection alone may not definitively identify a unit's specification level without consulting the serial number.