2005منتدى Steadi-Newbies
مواصفات ربط كابل الكهرباء لكاميرات السينما
مضى على هذا 21 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- Arri 435, 535, and SR3 models use Fischer 2-pin connector type S105Z087 for power input.
- Standard 12V camera and video camera power uses 4-pin XLR with pin 1 as minus and pin 4 as plus.
- Moviecam power input is a 4-position XLR connector with pin 1 as ground and 24V DC, with pins 2-4 commonly jumpered together.
- Panavision cameras use two Lemo connectors for power input: FFA3S303 (larger) and FFA1S302 (smaller), both with pin 1 as positive 24V and pin 2 as ground.
- Arri 2-position Fischer connectors are available with a lightweight Teflon case, designated SI405 Z087 C3J2R.
يعتمد على
- Moviecam pin assignments may vary depending on the rental house or camera source.
- The discussion focuses on cinema cameras from the early 2000s era and may not cover all models or manufacturers.
- No diagrams or visual schematics are provided, only connector type specifications and pin assignments.