2014منتدى Batteries/Power
Powering an Alexa camera from a Master sled battery system via 24v conversion
مضى على هذا 12 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- The internal power wiring of the Master sled is 16 AWG gauge
- An Alexa camera at 24v draws approximately 3.5 amps, and with AKS adds about 4 amps total for roughly 7.5 amps combined
- The Master sled has a 15 amp breaker that can accommodate power delivery to an 85 watt Alexa
- 16 AWG wiring is adequate for powering an Alexa or high-speed operation at 24v from the sled battery system
- Using an onboard battery for the camera instead of sled power may provide better weight distribution for certain lens and plate configurations
يعتمد على
- The wiring gauge information comes from one example and visual inspection rather than official specifications
- The discussion assumes a two-battery 24v conversion setup as described by an earlier source
- High-speed operation at 120-150 fps was only verified for short durations, not continuous use
- Power draw figures for Alexa are approximations and may vary by specific model and recording mode