2012منتدى Sled
Archer 1 sled مراقِب كابلِ مُصَرَّبَة و أسلاك خفيفة
مضى على هذا 14 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- ويحمل جورب ليمو الـ 8 بين Archer 1 sled السلطة، والإشارة بالفيديو، وأرض الفيديو، والمعلومات الاصطناعية مع ما يلي: الدبوس 1 هو أرض الطاقة، والباب 2 هو +12V، والدليل 3 هو اشارة فيديو، والدليل 4 هو شريط فيديو، والسلبي، والباب 6 إيجابي بشكل ملحوظ، والدبابيس 5 و 7 و 8 غير متصل.
- A custom breakout box can be built from the 8-pin Lemo connector to provide separate outputs for video on BNC, power on 4-pin XLR, and tally on 3-pin XLR for connecting external monitors and tally lights.
- The tally LED system requires the LED to be oriented correctly as a diode with current flowing in the proper direction, and all cables including video and power must be connected to the monitor for the tally lights to function.
- A Hirose Din plug (Digi-Key part HR212-10P-8P) can be used to create a tally cable, with a photocell soldered between pins 7 and 1 to activate the monitor's red LED indicator.
- The sled's nose dial controls the sensitivity of the tally sensor function.
يعتمد على
- The pinout information was derived from the Archer 2 manual and should be verified against official documentation for the Archer 1 specifically.
- The tally system design described was implemented as a custom modification and reflects one person's wiring approach rather than manufacturer specifications.
- The connection between tally negative and video ground may vary depending on specific monitor requirements.