SteadiHub
2010منتدى Batteries/Power

تشغيل كاميرا (سوني إكس 3) من نظام بطاريات ستيديكام

مضى على هذا 16 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.

ما توصّل إليه النقاش

  • The Sony EX-3 uses an EIAJ-4 connector for power, which is the same type found on various Sony consumer products including Vaio computers and other camcorders.
  • وتتوفر كابلات كهربائية جاهزة للربط بين Sony EX-3 و 4pin XLR من بائعين تجاريين ويمكن تكييفها أو استخدامها كمرجع للبناءات الجمركية.
  • تشغيل الكاميرا من نظام البطاريات الرئيسي للجهاز عن طريق موصل الليموزين يتطلب تسرّب أو شراء موصل الطاقة الـ Sony المناسب.
  • The Sony EX-3 power connector can be sourced affordably from electronics supply stores, often at minimal cost, and can be attached to various power distribution solutions like powertap multi-connectors.
  • Routing camera power through the rig's battery system rather than using the camera's built-in battery allows operators to adjust weight distribution for proper gimbal balance and performance on smaller rigs.
  • Custom power cable solutions are particularly useful when the camera is heavily accessorized, requiring ballast weight at the rig's base rather than on top of the camera.

يعتمد على

  • Solutions described are from 2010 and may not reflect current product availability.
  • One participant reported a commercial clamshell-style connector that was poorly manufactured and failed before use.
  • The specific lemo connector setup requires professional soldering skills or professional cable assembly services, which adds expense.
  • Weight distribution benefits depend on the specific camera configuration and rig setup, and may not be necessary for simpler mounting arrangements.

المعدات في هذا النقاش

BFD

المعدات أو القطع نفسها

  1. 2025History of wireless focus and lens control systems for Steadicam®: from cable-based Cinema Products and Seitz to Preston digital, and European solutions by Chrosziel, cmotion, and ARRI.FacebookSteadicam operators group
  2. 2018تحديد مدى استقطاب كابلات الطاقة من 2 إلىين ليمو لـ BFD و Teradek وحدةFollow Focus
  3. 2018التوافق بين المشابك Bartech follow focus يدويا والنظم الرقمية للمحركاتFollow Focus
  4. 2016تحديات جمع المدفوعات في خدمات استئجار المعدات وإمدادات الكابلاتLegal / Business Practices
اقرأ النقاش الأصلياسأل عن هذا النقاشالإجابة تستشهد بالأرشيف