2004منتدى Steadi-Newbies
فهم drop time في steadicam أجهزة الحفر وكيفية تأثيرها على مراقبة إطلاق النار
مضى على هذا 22 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- Drop time يقاس برفع sled إلى موقع أفقي على موقف متوازن وتوقيت كم من الوقت يستغرق للعودة إلى اليمين عند الإفراج.
- Drop time typically ranges from 2 to 3 seconds, though 2 seconds is considered standard while 3 seconds provides smoother movement.
- Slower drop times between 3 to 5 seconds require less finger pressure for corrections and make tilting easier, but provide less tactile feedback and can make it harder to maintain level.
- Faster drop times provide more immediate feedback but can cause more pendulum motion when moving the rig.
- Drop time selection depends on the specific shot requirements and operator experience, and should be adjusted and tested for different filming situations.
- Long lens work or stage work typically uses drop times around 4 seconds, while outdoor work uses approximately 3 seconds.
- Some operators use neutral drop time for certain rigs, which provides different handling characteristics but is more difficult to control.
- A recommended starting point for new operators is approximately 3 seconds, with adjustments made through practice and testing.
- A sled that is out of dynamic balance, rather than being bottom-heavy, is what causes the bottom to swing during whip pans.
يعتمد على
- The thread discusses equipment from 2004 and may not reflect current steadicam technology.
- Individual operator experience level significantly affects optimal drop time settings.
- Drop time preferences vary based on filming environment and shot type.
- Neutral drop time is described as difficult to control despite advantages.
- Counting method for measuring drop time matters for consistency.