ما توصّل إليه النقاش

• كاميرا Arri SR3 يمكن تشغيلها من موصل رقم Clipper 324 sled 24V ليمو بدون مشاكل حتى عندما يقترب الفولط من الحد الأقصى المقبول.
• Voltage from a Clipper 324 with two Steadicam cubes starts around 33.28V and drops to approximately 32.20V within the first minute of use, remaining within acceptable operating parameters.
• Using sled power instead of camera battery can reduce weight on the stabilizing arm, though the camera battery can alternatively serve as ballast for balance.
• Additional powered devices on the sled such as follow focus systems and video transmitters will draw additional current and further reduce voltage.

يعتمد على

• The advice is based on experience with Clipper 324 and PowerCube batteries, not exhaustive testing across all conditions.
• This approach assumes familiarity with acceptable voltage ranges and camera protection mechanisms.

القطع

Follow Focus

المعدات أو القطع نفسها

1. 2026اسحب التركيز و اقسم نفسك أثناء العمل خاصة على العروض الحيةOperator practice
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest work flow.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) follow focus system: wired structure, motors, and early operational experience (1990s).FacebookThe Steadicam Group
4. 2024تعديلات على جهاز الكشافة رقم Steadicam لتوسيع نطاق توزيع الطاقة وربطهاGeneral Discussion