2012منتدى Steadi-Newbies
مطاردة شاشات من طراز مارشال HD على Zephyr sled ونقل مواقع الاتصالات BNC
مضى على هذا 14 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
موضع خلافاختلف المشاركون ولم يصلوا إلى خلاصة. اقرأ النتائج على أنها مواقف، لا إجابة.
ما توصّل إليه النقاش
- The Marshall V-LCD70MD 7-inch monitor mount lacks fat holes for securing the monitor, causing it to rotate; using rubber or star lock washers at the mounting point helps reduce this movement.
- The Zephyr sled has two video connectors: an SD-BNC and an HD-BNC, with the HD-BNC meeting proper SMPTE HD-SDI standards while the SD-BNC does not.
- The top stage plastic cover can be opened by removing the underside das; the BNC and Lemo connectors sit in grooves within the plastic and can sometimes be repositioned if sufficient cable slack exists.
- وتتفاوت طول الكبلات بين فرادى الوحدات البالغ عددها Zephyr وحدة؛ ويتمتع البعض بما يكفي من الحزمة لاستبدال مواقع الاتصال بينما لا يفعل آخرون ذلك، ولا سيما بعد رفع مستوى المصانع التي قد تقلل من الكابلات المتاحة.
- ويمكن توجيه اشارات الفيديو الخاصة بـ HD-SDI من خلال موصل SD-BNC إلى جهاز رصد باستخدام كابل من طراز Hirose-to-BNC بعد السوق، على الرغم من أن قوة الإشارة قد تقل قليلا.
- A Hirose connector breakout cable for the bottom sled connector costs approximately 470 dollars from the manufacturer and carries both video and power signals.
- وتشمل حلول الطاقة البديلة استخدام الكابلات من طراز D-Tap أو P-Tap لتشغيل الشاشة بصورة مستقلة، مما يتيح استخدام خطوط الفيديو الخاصة بالبيوتادايين السداسي الكلور للإشارة الأولية.
- وبعد السوق، يمكن برمجة أشرطة فيديو وكابلات كهربائية من طراز Hirose-to-BNC أو مصادرها من أطراف ثالثة، ويمكن أن تشمل تكامل الإشارات الاصطناعية.
يعتمد على
- وتتفاوت طول الكبلات وحيز تحديد المسارات حسب كل وحدة على حدة وسنة التصنيع، مما يحد من إمكانية نقل الموصول.
- The SD-BNC connector is not guaranteed by SMPTE standards for HD-SDI, though users report it functions adequately in practice.
- Custom cable solutions and modifications require either fabrication skills or sourcing from third-party vendors not officially documented in manufacturer materials.
- Tiffen factory upgrades such as the tally modification may alter internal routing and prevent previously possible connector swaps.
المعدات في هذا النقاش
القطع
المعدات أو القطع نفسها
- 2026Steadicam® A-30 lower arm segment stiffness and squeaking after warranty service; bearing ring contact hypothesis.FacebookSteadicam operators group
- 2026تخفيض انخفاض الفولطية في قياس Steadicam® Zephyr كوخ لكاميرات البث عالية الطاقة.موضع خلافFacebookSteadicam operators group
- 2026أول عملية شراء للمثبطات: Steadicam® النخبة (14 كيلوغراما من الحمولة، مدمجة Volt 3) مقابل القس إيفو (حمولة أعلى) واستراتيجية السوق المستعملة.موضع خلافFacebookThe Steadicam Group
- 2026إزالة دبوس طائرة عالقة من كتلة اتصال للذراع Steadicam® Zephyr مستعملة، وإعادة تشكيل لطريقة الغوفFacebookSteadicam operators group