2012منتدى General Discussion
توصيل رقم Sony كامبو لـ Steadicam ماجستير السينما sled للتدريب
مضى على هذا 14 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- A complete Master Film Cine kit with sled, arm, vest and accessories at 8000 USD represents good value compared to market prices for used systems in good condition.
- Training can be conducted with a handheld camera weighing approximately 10 kg, with additional weight added to the cage to simulate an HD camera load.
- The sled monitor does not function in HD, so either the camera must be changed or a downconverter must be purchased if using HD equipment.
- SD signal cable connects from camera to the SD BNC input on the sled, with power supplied to both the sled and monitor.
- For A/V input connections, a standard cable compatible with cameras like the Canon 5D with separate video and audio connectors should be obtained.
- The sled has a CAMERA/VTR switch on the front body that must be turned to the camera position during operation, which is a common setup mistake.
- Formal training through workshops is strongly recommended, as operating a steadicam involves many techniques beyond basic setup.
يعتمد على
- The specific method of adapting a Sony A/V output camcorder to the sled was not fully detailed or tested in this discussion.
- The advice to add weight to the cage to simulate an HD camera is approximate and may require adjustment based on the actual camera used.
- The downconverter requirement for HD cameras was mentioned but not thoroughly explained.
- This discussion does not cover advanced operational techniques or troubleshooting.