2006منتدى Cameras (Film/Video/HD)
Sony كاميرا XDCAM الموازنة والمناولة على أجهزة استقرار الكاميرا
مضى على هذا 20 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ملاحظة (حتى أكتوبر 2026)لم يعد كورت أو. شالر، مطوّر أنظمة Artemis وTrinity، يعمل لدى ARRI منذ نهاية عام 2025. على حد علمنا، لا يوجد لدى ARRI حاليًا فريق مخصص ولا جهات اتصال رسمية لأنظمة المثبّتات. نرى أن مستقبل هذا الخط غير مؤكد. إذا كنت تشتري جديدًا، فاحصل مسبقًا من ARRI على تأكيد مكتوب بمدة ضمان الخدمة وقطع الغيار. اطلب من الشركة المصنّعة فحص الأجهزة المستعملة قبل الشراء.
ما توصّل إليه النقاش
- The XDCAM camera body weights approximately 9 kilograms without battery and lens.
- وعندما يكون الوزن الكلي مجهزاً تجهيزاً كاملاً بالعدسات، وfollow focus، والمرسل، والبطارية الخلفية، يصل إلى ما يقرب من 14 إلى 15 كيلوغراماً.
- فالكاميرا متأصلة في المقام الأول مع أي عدسة ملحقة، مما يتطلب وزناً مضافاً إلى الخلف لتحقيق التوازن المناسب.
- ويمكن توازن الكاميرا على أسلحة تثبيت الاستقرار باستخدام بطاريات إضافية مثبتة في الخلف.
- The camera has a thumbnail function on the LCD screen that allows reviewing shots without rewinding.
- The camera includes a flip function in the menu for reversing the image when shooting in low mode.
- XDCAM can be flown on small stabilization rigs with proper weighting and balancing techniques.
- The camera works with disc recording instead of tape, with discs formatting automatically when inserted.
- A camera rig totaling approximately 19 kilograms represents the practical limit for small gimbal stability.
يعتمد على
- Balancing depends on the specific lens and accessories being used.
- The front-heavy characteristic applies to the XDCAM with any lens.
- Wireless video and follow focus add weight requiring different balancing approaches.
- The weight limit of 19 kilograms is based on user experience with one specific gimbal setup, not a universal specification.
- Reports of disc handling behavior differ slightly between users.
المعدات في هذا النقاش
القطع
المعدات أو القطع نفسها
- 2026تقلص عدد خطوط الفيديو الخاصة بشركة BNC في ARRI Artemis 1 sled: أماكن العمل المؤقتة والحلول الدائمة.FacebookSteadicam operators group
- 2026قوة القصف السليم في gimbal مسامير السرج مع الكاميرات الثقيلة: خطر الإفراط في التصعيدFacebookSteadicam operators group
- 2026Upgrading an M1 Volt gimbal from 1.5-inch to 1.75-inch center rod: insert replacement procedure and encoder ring considerations.موضع خلافFacebookSteadicam operators group
- 2026كاميرا كهرباء، وشاشات المراقبة، وأجهزة الدخول في نفس الوقت في ARRI Artemis مع الطوب البطارية BMS وتطابق لوحات البطارية.SteadiHub