ما توصّل إليه النقاش

• Archos recorders may not recognize a video input if the signal strength is below 1 volt peak-to-peak, even though the signal appears normal on a monitor and tuner.
• Passing a weak video signal through a video distribution amplifier can boost the signal strength enough for Archos recorders to detect it.
• Some Archos models have a black and white input mode that may need to be enabled for black and white video sources.
• Connecting the transmitter to the MM-Out instead of through the Modulus resolved the video signal detection issue for at least one user with the SR-3.
• The video signal strength from the SR-3 output may be insufficient for Archos compatibility even when the Modulus voltage regulator is installed.

يعتمد على

• The exact cause was never definitively confirmed in this thread.
• Different Archos models may have different input requirements and menu options.
• One suggestion to use black and white input mode did not resolve the issue for the original poster.
• The proposed solution of using MM-Out output instead of the standard connection path was not tested by the original poster before the thread ended.

المعدات في هذا النقاش

Modulusالكتالوج

المعدات أو القطع نفسها

1. 2022Power connector pinout for Master Greenscreen CRT monitor with 6-pin Hirose connectorMonitors
2. 2017تجهيزات لاسلكية للتبريد عن بعد لـ steadicam عمليةGeneral Discussion
3. 2016خصائص الأداء والموثوقية لأجهزة إرسال الفيديو اللاسلكية في تلتاماكس مقارنة بالعلامات التجارية المتنافسةموضع خلافVideo Assist and Video Accessories
4. 2014Teradek Bolt جهاز إرسال يعمل بشكل مثير أثناء العمليةVideo Assist and Video Accessories