2004منتدى Cameras (Film/Video/HD)
تشغيل كاميرا (تومسون فيبر فيمستر) في Steadicam جهاز
مضى على هذا 22 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- تزن الكاميرا حوالي 6 باوندات مع عدسة وزنها 3 باوند، مما يجعلها خفيفة نسبياً لكاميرا عالية التعريف في ذلك الوقت.
- واستخدمت النماذج الأولية المبكرة قرصاً صلباً مركباً في مرفأ خارجي بحوالي 4.5 دقائق من القدرة على التسجيل، وإن كان من المتوقع أن يمتد ذلك إلى 10 دقائق بعد ذلك.
- ووفر خيار التسجيل في حالة جراس فالي فلاشباك الصلبة خزنا مخصصا للتسجيل مصمما للاستخدام في Steadicam وحافظ على حوالي 10 دقائق من محتوى البيوت البشرية.
- Camera balancing is unusual due to minimal tail weight, requiring careful rig adjustment.
- Power draw is approximately 5 to 9 amps, manageable with large battery packs like Dionic batteries.
- Tethered operation using dual SDI or SDI cables to an external video receiver was standard, requiring flexible BNC connectors for rig mobility.
- An L-plate adapter could be fabricated to improve weight distribution and steadicam compatibility.
- The camera produces no internal down-conversion, requiring external processing if needed.
- Operators reported that recording time limitations between takes were offset by the camera's light weight compared to other HD options available at the time.
يعتمد على
- This discussion took place in 2004-2005 when the technology was newly introduced and still evolving.
- Recording capacity limitations of 4.5 to 10 minutes were a significant constraint for long takes.
- Tethered operation added cable management complexity to rigs.
- One operator's experience was from the Netherlands where some recording options were not available.
- The camera's balance characteristics were described as unusual and required operator adjustment.
- Comparison to competing systems like Genesis suggests similar battery drain concerns, though not definitively stated.