2007منتدى Arms
Clicking noise from Ultra arm during boom movements in 6-spring model
مضى على هذا 19 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- A single click sound occurring when booming up and down through the middle to upper range of arm motion may originate from the spring and tension adjustment mechanism
- Removing arm covers can help isolate whether the noise is caused by springs rubbing against improperly positioned cover spacers
- A misaligned safety cable pin inside a spring, creating minor contact with spring coils during compression and extension, can produce clicking sounds without affecting boom functionality
- Inadequate lubrication in the weight adjustment knob mechanism may cause clicking noises
- Professional service from the manufacturer is recommended before attempting disassembly, as the arm contains high-energy springs and complex internal mechanisms that require proper knowledge and tools
يعتمد على
- The exact cause was never confirmed in this thread as the original poster did not complete troubleshooting
- Advice about safety cable pin issues comes from experience with an older 6-spring arm model, not necessarily the Ultra model discussed
- The grease-related solution was reported for a different arm model (Masters Series)
- No information provided about whether the clicking affects audio recording quality in final footage