ما توصّل إليه النقاش

• يمكن استخدام نظام بطارية أومنيشوت مع وحدة HU1 نظراً لأن واجهة ارتفاع البطاريات متطابقة مع HU2
• The HU1 draws more power than the HU2 and requires moreurg current at startup, which can cause low-light jamming if the unit is powered off and back on during operation
• FM70 batteries provide more reliable performance with an HU1 than FM50 batteries when using an Omnishot
• Keeping the HU1 powered on continuously rather than cycling it off and on prevents the low-light jamming issue
• Even with limitations, the Omnishot remains the most cost-effective battery solution for HU1 users

يعتمد على

• Experience reported is specific to one operator's HU1, which may have had individual low-voltage circuit issues
• The workaround requires discipline to prevent focus pullers from turning off the unit during shooting days
• Some focus pullers prefer turning off the unit due to power concerns, which conflicts with the recommended continuous power approach

القطع

Follow Focus

المعدات أو القطع نفسها

1. 2026اسحب التركيز و اقسم نفسك أثناء العمل خاصة على العروض الحيةOperator practice
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest work flow.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) follow focus system: wired structure, motors, and early operational experience (1990s).FacebookThe Steadicam Group
4. 2024تعديلات على جهاز الكشافة رقم Steadicam لتوسيع نطاق توزيع الطاقة وربطهاGeneral Discussion