2011منتدى Batteries/Power
تشغيل كاميرا سوني PMW-EX1R على منصة جوية تجريبية
مضى على هذا 15 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- The Sony PMW-EX1R does not have a double-barrel power connector suitable for direct sled battery integration, so factory wiring cannot be used for this configuration.
- Using the camera's own battery (BP-U30) is the practical approach, as the total weight remains well under the 6-pound allowance for camera and power on a Pilot sled.
- The BP-U30 battery provides runtime of approximately one to two hours for the PMW-EX1R.
- Custom cables have been successfully built by others to power cameras from Pilot sleds, though this requires fabrication outside factory options.
يعتمد على
- Weight budget constraints may vary depending on the specific Pilot rig and total payload allowance.
- Runtime estimates are approximate and may vary based on actual usage patterns and camera settings.
- No specific technical details about custom cable construction are provided in the discussion.