2010منتدى Operating
مطاردة وتشغيل سينتكس جيروسكوب على مركبة Ultra 1 Steadicam
مضى على هذا 16 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- A Spintex gyroscope can be mounted on a Steadicam rig without causing balance or operating issues.
- The Spintex should be powered from the sled's 12V power output rather than from the camera's auxiliary power, as insufficient power supply causes slow gyro response and poor performance.
- Humidity and condensation present significant challenges when operating a Spintex in wet environments and require protective measures like rain covers and moisture removal tools.
- A preparation day before the shoot is recommended to test the Spintex mounting and power configuration.
يعتمد على
- The experiences reported are from years in the past and equipment specifications may have changed.
- No detailed technical specifications about power requirements or gyro performance thresholds are provided.
- The discussion focuses on one Steadicam model and may not apply to other rig configurations.
- Specific mounting techniques and cable requirements are not documented in detail.