2004منتدى Monitors
مستوى الكتروني من طراز FBX ومولدات خطوط الأنابيب لمراقبي كاميرات السينما
مضى على هذا 22 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ملاحظة (حتى أكتوبر 2026)لم يعد كورت أو. شالر، مطوّر أنظمة Artemis وTrinity، يعمل لدى ARRI منذ نهاية عام 2025. على حد علمنا، لا يوجد لدى ARRI حاليًا فريق مخصص ولا جهات اتصال رسمية لأنظمة المثبّتات. نرى أن مستقبل هذا الخط غير مؤكد. إذا كنت تشتري جديدًا، فاحصل مسبقًا من ARRI على تأكيد مكتوب بمدة ضمان الخدمة وقطع الغيار. اطلب من الشركة المصنّعة فحص الأجهزة المستعملة قبل الشراء.
ما توصّل إليه النقاش
- The FBX combines an electronic bubble level and frameline electricity in a compact tool smaller than competing products at approximately half the price.
- وتقدم شركة FBX خيارات متعددة للتكييف تشمل أربعة أحجام مختلفة، وحساسية الفقاعات المتغيرة، ومراقبة الرطوبة، والتعديلات في الاتجاه/الضرائب.
- ويتوفر قناع الفرامل أو المظلة الحدودية على الـ FBX على مستويين ثابتين (50 في المائة و100 في المائة) بدلاً من الكثافة المتغيرة.
- ويفضّل المشغلون وضع عروض على مستوى الفقاعات الإلكترونية في أعلى الشاشة بدلاً من وضعها في الإطار لتقليل سفر العين إلى أدنى حد مع التحقق من التكوين والأفق.
- The FBX initial design restricted bubble placement to below the crosshair only, which manufacturers later modified to allow placement at either top or bottom of screen based on operator feedback.
- فالعرض على مستوى الكتروني بكثافة قابلة للاختيار مخفيا وراء مؤشر فقاعة فقط من شأنه أن يحسن من الوضوح عندما تظهر الفقاعة على مناطق شاشة مزدحمة أو مشرقة.
- The device uses standard connectors and cables rather than captive cables, and ships with configuration flexibility for different sled designs.
- Service turnaround for FBX orders was less than one week at the time of this discussion.
يعتمد على
- Discussion is from 2004 and product specifications may have changed significantly since then.
- Initial design limitations on bubble and border placement were acknowledged constraints rather than resolved issues.
- Field reliability testing under harsh conditions was mentioned as pending at the time of writing.
- Pricing and availability information reflects 2004 market conditions.
- Some claims about superior design features of competing products (XCS level) remain unverified in this thread.
المعدات في هذا النقاش
القطع
المعدات أو القطع نفسها
- 2026Upgrading an M1 Volt gimbal from 1.5-inch to 1.75-inch center rod: insert replacement procedure and encoder ring considerations.موضع خلافFacebookSteadicam operators group
- 2026(أ) الانتقاء بين رفع مستوى مجموعة مواد بروفيد-2 القديمة أو الاستثمار في جهاز مهني: النهج الأول لحلقة العمل مقابل النهج الأول للمبتدئين في المعدات.موضع خلافFacebookSteadicam operators group
- 2026Intry-level stabilizationr strategy on a 15,000 USD budget: Rever EVO against used Artemis 2 or M2 plus Volt, in a market with limited secondhand availability.موضع خلافFacebookThe Steadicam Group
- 2026تقييم ما إذا كان ينبغي إصلاح نظام " بروفيد 2 " القديم أو الاستثمار في جهاز جديد للعمل على مستوى الدخول steadicamSteadi-Newbies