2008منتدى Steadi-Newbies
Monitoring options when Sony EX1 camera outputs HD-SDI signal that disables other video outputs
مضى على هذا 18 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- The Sony EX1 camera disables RCA and component video outputs when HD-SDI output is active, limiting monitor choices for Steadicam rigs
- Component video output on the EX1 remains active simultaneously with HD-SDI output, unlike the RCA outputs
- Recording directly to the camera's onboard SXS cards allows switching to SD monitoring mode without requiring an external HD-SDI cable run, eliminating weight and stiffness issues on lightweight rigs
- An Ikan 8 inch monitor accepting component video costs around 800 dollars as an alternative monitoring solution
- Thin flexible HD-rated cable such as Mogami 2964 can reduce weight and stiffness compared to standard HD-SDI cables, though keeping length to 10 feet maximum and transitioning to regular cable beyond that distance is recommended
- Pilot monitors have anti-reflective coatings that perform better outdoors than budget alternatives, though aftermarket coating options may be available
- AJA downconverters can split and convert HD-SDI signals for use with NTSC monitors at a cost around 1500 dollars on the low end
يعتمد على
- The EX1 component output behavior was not verified by most responders
- Mogami 2964 cable performance was only tested by one user for composite video, not confirmed for HD use on Steadicam rigs
- The aftermarket monitor coating suggestion was speculative
- Wireless HD transmitter solutions mentioned as forthcoming but not yet available or tested at the time of discussion