2012منتدى Video Assist and Video Accessories
Comparing UHF and 2.4 GHz wireless video transmission for on-set use
مضى على هذا 14 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- ويعمل التردد فوق العالي في نطاق التردد 400-900 ميغاهيرتز، في حين أن 2.4 جيهرتز أعلى بكثير من الطيف، مما يجعل من غير المحتمل أن يتسبب في تداخل مع بعضها البعض.
- The 2.4 GHz band is heavily saturated in the United States and on film sets, while UHF systems typically offer more available channels to shift between.
- وتحتاج إشارات التردد العالي جداً في معظمها إلى الانتقال من خط البصر وتحسن الأداء عندما تكون الهوائيات في موقعها مع الحد الأدنى من العقبات بينها.
- ويمكن أن تخترق الترددات المنخفضة، مثل التردد العالي جدا، من خلال أجسام مادية أفضل من ترددات أعلى مثل 2.4 غيغاهيرتز، التي يستوعبها بسهولة أكبر الجدران، والعلف، والظروف الجوية.
- Two 2.4 GHz devices operating on the same frequency can interfere with each other, potentially disrupting operation of both systems simultaneously.
- Digital wireless systems using OFDM modulation with multiple antennas (MIMO) perform more reliably than analog FM systems at the same frequency bands.
- Simple analog FM transmission systems at 5.8 GHz or 2.4 GHz are more susceptible to signal loss in crowded RF environments compared to digital systems.
- A 2.4 GHz wireless follow focus system and a 2.4 GHz video transmitter may interfere when operating simultaneously if they occupy the same frequency channel.
- Digital HD-SDI transmission at high frequencies is extremely sensitive to interference because signal loss results in complete loss of picture rather than degradation.
يعتمد على
- The experience described with interference was anecdotal and limited to one specific incident; channel switching was not tested to confirm if another channel would have solved the problem.
- The discussion conflates different frequency bands and transmission types without consistent technical specifications for all products mentioned.
- One user's experience with an inexpensive 5.8 GHz system cannot be generalized to all 5.8 GHz products, which vary widely in design and implementation.
- Environmental RF saturation varies by location and cannot be predicted without specialized testing equipment that operators typically do not carry.
القطع
المعدات أو القطع نفسها
- 2026اسحب التركيز و اقسم نفسك أثناء العمل خاصة على العروض الحيةOperator practice
- 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest work flow.FacebookSteadicam operators group
- 2025LC-1 (Lens Control-1) follow focus system: wired structure, motors, and early operational experience (1990s).FacebookThe Steadicam Group
- 2024تعديلات على جهاز الكشافة رقم Steadicam لتوسيع نطاق توزيع الطاقة وربطهاGeneral Discussion