2007منتدى Sled
رفع مستوى القاعدة إلى sled مع الدعم المتعدد البطاقات والقدرة الدينامية على الموازنة
مضى على هذا 19 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- A sled base can be designed to support three batteries that run in parallel for traditional formations or in series for high-power accessories, with the third bat optionally powering monitors independently from camera and accessory power.
- البطاريات المثبتة على قضبان التزحلق تسمح بالموازنة الدينامية من خلال تعديل موقعهم من الطوابق والطعام ليطابق وزن الكاميرا.
- يمكن تصميم محركات البطاريات الخلفية لتصليح 180 درجة مع الحفاظ على الصرامة عندما تكون مغلقة.
- A custom sled base can integrate multiple power outputs including XLR, Hirose, LEMO, and BNC connectors along with video distribution capabilities within a compact footprint.
- Adding weight above the camera (12-15 pounds of steel) improves balance and flight characteristics when using lightweight cameras that would otherwise drop too quickly.
- Custom sled bases require significant design and machining work but can be adapted to fit different post sizes and electrical specifications based on user requirements.
- A fully equipped custom sled base with multiple power connectors, video distribution, and independent battery placement required approximately one week to design and install.
يعتمد على
- The upgrade cost approximately 5000 Canadian dollars and may vary based on specific connector choices and features selected.
- The density of connectors and electronics in the base makes internal space extremely tight, limiting further additions.
- Quick-release collar systems for the post may present cabling limitations depending on post size and configuration.
- The weight and rigidity of the three-battery system was tested with the stated camera and setup but generalization to other configurations is unclear.
- One user reported problems balancing a lightweight HVX camera even with red springs on an EFP, requiring additional ballast.