2009منتدى Steadi-Newbies
إدارة قاذفة كابل BNC والموازنة على جهاز كاميرا مثبت بـ gimbal
مضى على هذا 17 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- A short light weight BNC cable can be connected directly to the camera and routed to the gimbal with video and a barrel connector at the end.
- يمكن أن يهرب كابل ثاني للوزن الخفيف من الجيمبال على طول ذراع المشغل باستخدام أشرطة صغيرة على كل قسم من أجزاء الذراع و يلحق بخلفية السترة بالفلكرو،.
- Using a split-cable configuration allows the operator to disconnect the BNC at the gimbal and move freely around the cabin when the rig is docked.
- Extremely thin BNC cables (described as kite-string sized) in 75-ohm specification can be looped from the camera back to the operator's shoulder and secured with a barrel connector, with a separate home run cable for the assistant to manage.
- A gimbal rig that pulls to one direction during panning may be corrected through proper cable routing and weight distribution rather than indicating incorrect setup.
يعتمد على
- The cable management techniques address gimbal operation specifically and may not apply to other camera stabilization systems.
- The extremely thin custom BNC cables mentioned were sourced from a specific supplier and their general availability is unknown.
- Wireless solutions were mentioned as an alternative but not explored in detail.