2013منتدى General Discussion
يَصِلُ a لوحة إطلاق سريعة إلى a لوحة وزن مصممة خصيصاً مَع فتحاتِ مُرتَبةِ
مضى على هذا 13 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- لوح إطلاق سريع يمكن ربطه بلوحة وزن باستخدام مسمار يمر من خلال فتحة واضحة في لوحة واحدة وخيوط في لوحة أخرى.
- If all holes are threaded, one hole must be drilled out to create a smooth pass-through opening for the screw.
- When using a screw with the threads stripped near the neck, the fastener can pass through without engaging with the receiving threads.
- Spacers or washers may be needed between the quick release plate and weight plate to provide clearance for mechanical components like levers to operate properly.
- The quick release plate should be positioned on top of the weight plate during assembly.
يعتمد على
- The solution depends on having access to a drill and appropriate drill bits if holes need to be cleared.
- Specific screw lengths and types needed were not detailed in the thread.
- The discussion references a Manfrotto quick release plate specifically but principles may apply to other models.
- The final solution was found but not fully documented in the thread.