ما توصّل إليه النقاش

• The 3-pin connector is similar across ALEXA Mini, Mini LF, and ALEXA 35 cameras, but external inspection cannot determine whether the cable is wired for 12 V or 24 V operation.
• To identify cable voltage: unscrew the coupling nut on the 3-pin connector and inspect the pin configuration, verify with a multimeter, or read the voltage display on the camera itself.
• The critical difference is whether pins 6, 7, and 8 of the 8-pin camera connector are routed to the 12 V or 24 V pins of the sled connector.
• For 24 V operation, set the sled to 24 V and install batteries in the correct positions; if the cable is wired for 12 V, an ALEXA 35 will not operate regardless of sled setting.

يعتمد على

• Sled model and power tap configuration.
• Cable age and manufacturing batch.

المعدات في هذا النقاش

ALEXA 35الكتالوج

المعدات أو القطع نفسها

1. 2026القضاء على الاهتزاز مع ARRI ALEXA 35 في Steadicam®: خيارات الرفع الصلب للطبقات لتجاوز نظام dovetailFacebookThe Steadicam Group
2. 2026Mounting the RIA-1 wireless receiver on ARRI Trinity with ALEXA 35FacebookArri Artemis Trinity
3. 2026إخفاق توزيع الطاقة من قِسَم "دي-تاب" على جهاز كهرباء Venice 2، وطرق الإمداد بالكهرباء.موضع خلافFacebookSteadicam operators group
4. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest work flow.FacebookSteadicam operators group