2006منتدى Video Assist and Video Accessories
مُسجل فيديو أرخوس لا يكتشف إشارة فيديو من مصادر خارجية
مضى على هذا 20 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- An Archos video recorder may fail to detect a video signal if the signal strength is too weak, typically below 1 volt peak to peak.
- Video input source settings should be verified and may need to be changed from automatic to a specific format like black and white or composite, rather than relying on auto-detection.
- Monitor termination issues can prevent proper video signal detection and should be checked as part of troubleshooting.
- A video distribution amplifier may be necessary to boost a weak video signal to a level the Archos can recognize.
- The Archos can be particular about video signal quality and will refuse to display a weak or improper signal even when the cable and wiring are correct.
- Consumer-grade cameras may produce video signals too weak for the Archos to detect, while professional cameras typically provide stronger signals the device will recognize.
يعتمد على
- Discussion involves older Archos models from 2006 and may not apply to newer devices.
- The final update indicates the Archos device failed completely and was sent for service, so it remains unclear whether the signal issue or a hardware failure was the root cause.
- No definitive solution was confirmed in the thread.