ما توصّل إليه النقاش

• The Trinity 1 Live is essentially a standard Trinity 1 fitted with mounting plates near the lower stage of the center rod to accommodate broadcast transmitter and receiver modules, with tally lights integrated into the signal cabling.
• New features include a Cat5 connector at the gimbal head (mounted on the yoke), two 6G-SDI video lines capable of aggregating to 12G-SDI throughput, and the MGT-2 control unit that handles zoom and focus via LBUS protocol, allowing other LBUS-compatible devices to be daisy-chained.
• MGT-2 profiles can be switched in the field to adapt to different productions and configurations.
• One limitation noted by operators: despite the upgrade cost, the gimbal lacks 360-degree roll capability, which some broadcast clients expect and whose absence could jeopardize future work.
• Open questions remain about how much of the center rod's usable length is consumed by the transmitter plates, and whether the L-Cube 2 focus unit can operate via LBUS or if ARRI cforce motors are required.

يعتمد على

• Scope and usable rod length for additional payloads
• Compatibility of L-Cube 2 with LBUS protocol versus dependency on cforce motors
• Client expectations regarding roll range

المعدات في هذا النقاش

Trinity 1الكتالوج

المعدات أو القطع نفسها

1. 2026Trinity vs. 360-degree roll head: practical job prospects and system flexibility for operator investment decisions.موضع خلافFacebookSteadicam operators group
2. 2025تُقيم رأساً لـ(آري ترينيتي 1) مع وحدة يد نائية بعد أزواج سابقين مع عجلات مختلفة.SteadiHub
3. 2025الموازنة بين رأس ARRI و Trinity 1 على الـ sled قبل ملحق الكاميرا باستخدام أقواس وزن معاكسة و لوحات معادلة.SteadiHub
4. 2025انجراف بانجراف في ARRI Trinity 2 gimbal عندما كان مركباً ومتوازناً - عادياً?موضع خلافFacebookArri Artemis Trinity