ما توصّل إليه النقاش

• The standard Ronin gimbal can handle the load of an URSA Mini 4.6K when coupleed with a Sigma 18-35mm f/1.8 lens and powered by the gimbal itself without the camera battery.
• A Ronin gimbal can be mounted directly to a steadicam top stage using a CineMilled plate, allowing quick shifting between handheld gimbal operation and steadicam use within about one minute.
• The steadicam setup is better suited for longer takes and eye-level shots compared to handheld gimbal operation.
• The Ronin-M has lower payload capacity than the standard Ronin and may struggle to balance an URSA Mini even when the camera battery and side handle are removed and lightweight lenses are used.

يعتمد على

• The full Ronin plus steadicam setup may exceed a 1500 EUR budget.
• No confirmation provided regarding whether the Ronin-M or Ronin-MX can successfully balance an URSA Mini 4.6K even at minimum weight configurations.
• The discussion does not address high-to-low mode movements or other specific operating modes.

القطع

Top Stage

المعدات أو القطع نفسها

1. 2026Rig setup for 180-degree immersive camera operation with Blackmagic URSA Cine Immersive: minimizing rig and monitor visibility in ultra-wide field of view.FacebookThe Steadicam Group
2. 2026شغل في sled: من أين تأتي وما يمكن إصلاحه في اليومOperator practice
3. 2026Betz مجموعة الأدوات قد غيرت يدها إلى 2ية، وما يعنيه ذلك بالنسبة للأجزاء والخدماتOperator practice
4. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest work flow.FacebookSteadicam operators group