SteadiHub
2009منتدى Cameras (Film/Video/HD)

Mounting an Arriflex 16mm BL camera on a Steadicam rig and solving related technical challenges

مضى على هذا 17 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.

ما توصّل إليه النقاش

  • The Arriflex 16mm BL can be mounted on a Steadicam but is not ideal due to its weight and top-mounted magazine design.
  • اللوحة dovetail يجب أن تُلحق مباشرة إلى أسفل الكاميرا لإدارة توزيع الوزن من المجلة الأعلى.
  • وباستخدام مسمار طويل جداً يمكن أن يجعل الكاميرا تبدأ بالركض بشكل غير متوقع إذا كان بقشيش البراميل يربط المعادن بالثقب المكشوف؛ فعدم وجود مسمار أو تعقيم شريطي يمنع هذه المسألة.
  • وزن المجلة السينمائية قابل للتصرّف باختصار لأن الكاميرا ثقيلة نسبياً لشكل 16 ملليمتر بينما الفيلم نفسه خفيف.
  • The 16mm BL requires a focus equipment attached to the lens housing for silence operation, or alternatively using a different lens without the housing results in louder camera operation.
  • A video tap is essential for monitoring framing during operation and may need to be powered separately from the camera to avoid introducing electrical noise.
  • The 16mm BL uses a 4-pin XLR power connector for 12V supply, and powering accessories through the camera rather than directly from the rig causes significant electrical noise.
  • An SR2 camera is more Steadicam-friendly than the 16mm BL and should be chosen if available as an alternative.

يعتمد على

  • The discussion references footage from the past but no recent hands-on testing is documented.
  • Mounting a top-magazine camera on Steadicam creates inherent balance challenges not present with modern designs.
  • The focus gear attachment method depends on lens type and may require modifications.
  • Later discussion mentions a 3-pin XLR power input variant, suggesting different 16mm BL versions may exist with different specifications.
  • No detailed information provided about acceptable weight limits for the specific Steadicam model being used.

القطع

Dovetail Plate

المعدات أو القطع نفسها

  1. 2026القضاء على الاهتزاز مع ARRI ALEXA 35 في Steadicam®: خيارات الرفع الصلب للطبقات لتجاوز نظام dovetailFacebookThe Steadicam Group
  2. 2026تبدل الكاميرا بين الشاحنات الثلاثية والأجهزة: أرخص ترقية لمعظم المشغلين لا تجعلOperator practice
  3. 2026تُصَلِّقُ a طليق مِنْ سرعةِ التوقّفِ على لوحةِ Top Stage dovetail، ويُوقّعُ زلّةَ آلةَ التصوير أثناء عمليةِ كتفِ.موضع خلافFacebookThe Steadicam Group
  4. 2026إدارة القيود المفروضة على الوزن عندما تطير كاميرا تصويرية كبيرة ذات عدسات انكورفية ثقيلة على جهاز ستيديكامGeneral Discussion
اقرأ النقاش الأصلياسأل عن هذا النقاشالإجابة تستشهد بالأرشيف