SteadiHub
2023من مجموعة على Facebook: The Steadicam Group

Powering an ARRI Alexa 35 from a Steadicam® PRO sled with CineLive electronics: 24 V bat formation.

ما توصّل إليه النقاش

  • The Alexa 35 is a native 24 V camera and does not require 26 V batteries; shift the sled to 24 V mode and supply it via a 24 V cable.
  • One operator reported reliable operation with three 12 V Gold Mount batteries in series (24 V mode) on the sled.
  • ARRI آلة تصوير مصممة عادة لعملية محلية من 24 V.
  • Two 12 V batteries in series provide longer runtime than the same batteries in parallel configuration, because current draw is halved at the higher voltage.
  • A 12/24 V XLR Gold Mount plate combined with a 24 V 4-pin XLR to CineLive cable is one viable setup; alternatively, power the camera battery slot directly.

يعتمد على

  • Configuration depends on battery capacity and rig power draw.

المعدات في هذا النقاش

ALEXA 35الكتالوج, CineLiveالكتالوج

المعدات أو القطع نفسها

  1. 2026Low mode وقلب الصورة: ما التحقق من الكاميرا قبل اليومOperator practice
  2. 2026Mounting the RIA-1 wireless receiver on ARRI Trinity with ALEXA 35FacebookArri Artemis Trinity
  3. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest work flow.FacebookSteadicam operators group
  4. 2026القضاء على الاهتزاز مع ARRI ALEXA 35 في Steadicam®: خيارات الرفع الصلب للطبقات لتجاوز نظام dovetailFacebookThe Steadicam Group
النقاش الأصلي على Facebook (لأعضاء المجموعة فقط)اسأل عن هذا النقاشالإجابة تستشهد بالأرشيف