ما توصّل إليه النقاش

• The RED camera accepts remote record start and stop commands through the upper 4-pin LEMO connector on the back of the camera
• Recording is triggered by momentarily shorting pin 1 (ground) to pin 2 (GPI) on the RED connector
• The appropriate connector type for building a cable is LEMO FGG.0B.304.CLAD42Z
• The BFD follow focus unit must be configured to MOM (momentary) mode to work with the RED camera remote control function
• The cable and configuration method worked with RED camera firmware builds 13, 15 and was designed for builds 10 and 11

يعتمد على

• Described functionality applies to RED camera firmware build 10 and later
• The exact connector designation on the RED camera back was not confirmed in the discussion
• No details provided about setup or potential issues with other firmware versions

المعدات في هذا النقاش

BFD

القطع

Follow Focus

المعدات أو القطع نفسها

1. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest work flow.FacebookSteadicam operators group
2. 2026اسحب التركيز و اقسم نفسك أثناء العمل خاصة على العروض الحيةOperator practice
3. 2025History of wireless focus and lens control systems for Steadicam®: from cable-based Cinema Products and Seitz to Preston digital, and European solutions by Chrosziel, cmotion, and ARRI.FacebookSteadicam operators group
4. 2025LC-1 (Lens Control-1) follow focus system: wired structure, motors, and early operational experience (1990s).FacebookThe Steadicam Group