ما توصّل إليه النقاش

• The Archer 1 can develop unwanted play in the yoke bearing axis between the gimbal and yoke fork that causes the rig to shift out of level when tilted past certain angles.
• Thin shims inserted between the yoke and gimbal on the appropriate sides can be used to eliminate the play and restore acceptable centering, following the Ultra gimbal centering manual procedure.
• Multiple shims of varying thickness may be needed to achieve proper alignment, requiring iterative testing and adjustment.
• A quick shimming solution may restore functionality for immediate use but may not represent a permanent fix, and professional factory service is recommended for complete resolution.
• Keeping spare shims in the kit allows for emergency adjustments on set if misalignment occurs.

يعتمد على

• This is specific to the Archer 1 model, which lacks adjusting screws on the yoke present on later models like the Archer 2 and Ultra 2.
• The solution represents a temporary workaround rather than a definitive repair.
• The procedure requires access to shims and the Ultra gimbal centering manual, and successful alignment depends on careful trial and error with different shim combinations.
• The user notes the outcome was acceptable but not perfect.

المعدات في هذا النقاش

Zephyrالكتالوج

المعدات أو القطع نفسها

1. 2026Steadicam® A-30 lower arm segment stiffness and squeaking after warranty service; bearing ring contact hypothesis.FacebookSteadicam operators group
2. 2026تخفيض انخفاض الفولطية في قياس Steadicam® Zephyr كوخ لكاميرات البث عالية الطاقة.موضع خلافFacebookSteadicam operators group
3. 2026أول عملية شراء للمثبطات: Steadicam® النخبة (14 كيلوغراما من الحمولة، مدمجة Volt 3) مقابل القس إيفو (حمولة أعلى) واستراتيجية السوق المستعملة.موضع خلافFacebookThe Steadicam Group
4. 2026إزالة دبوس طائرة عالقة من كتلة اتصال للذراع Steadicam® Zephyr مستعملة، وإعادة تشكيل لطريقة الغوفFacebookSteadicam operators group