2014منتدى Steadi-Newbies
إنشاء كابل طاقة من Steadicam موصل ليمو لجهاز AJA
مضى على هذا 12 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- The FFA.1S.303.CLAC Lemo connector on a Pro SD rig Steadicam provides three pins: pin 1 is 24V, pin 2 is ground, and pin 3 is 12V unregulated
- The unregulated 12V output can reach approximately 16.2 volts when drawing power from a freshly charged Dionic HC battery
- AJA converter devices with a 5-18V power input specification should tolerate the voltage range from a Steadicam rig's Lemo connector
يعتمد على
- The unregulated voltage behavior depends on battery charge state and may vary with different battery models
- Sharing power between multiple devices on the rig may increase current draw and voltage fluctuations
- Actual compatibility depends on the specific AJA device model and its voltage tolerance