2010منتدى Sled
Master Series 12V موصلات هيروز تخسر الطاقة في sled بينما الفيديو يفشل أيضا
مضى على هذا 16 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- A power supply board beneath other boards generates the 12V delivered to Hirose connectors through one DC-DC converter, while a separate converter produces the 5V and -5V that power video and horizon boards.
- إن عدم وجود مكثفات على لوحة الإمداد بالطاقة يمكن أن يتسبب في فقدان 12V طاقة لوصلات هيروز.
- Internal breakage or shearing of Hirose cables due to repeated bending stress can short power and video together, potentially causing fuses to blow in batteries and eliminating both power and video.
- When a DC-DC converter receives full battery voltage at its input but produces no output, the converter itself has likely failed.
- Insulation wear on cables at specific points should be addressed during rewiring to prevent future failures.
يعتمد على
- Advice specific to Master Series 12V sled from 2010.
- The Acon D15S1212 DC-DC converter mentioned may not be readily stocked by standard electronics distributors.
- Whether this failure pattern applies to other sled models or years is unclear.
- No definitive resolution provided for the specific DC-DC converter replacement options in the discussion.
المعدات في هذا النقاش
المعدات أو القطع نفسها
- 2026(أ) الانتقاء بين رفع مستوى مجموعة مواد بروفيد-2 القديمة أو الاستثمار في جهاز مهني: النهج الأول لحلقة العمل مقابل النهج الأول للمبتدئين في المعدات.موضع خلافFacebookSteadicam operators group
- 2026Intry-level stabilizationr strategy on a 15,000 USD budget: Rever EVO against used Artemis 2 or M2 plus Volt, in a market with limited secondhand availability.موضع خلافFacebookThe Steadicam Group
- 2026قوة القصف السليم في gimbal مسامير السرج مع الكاميرات الثقيلة: خطر الإفراط في التصعيدFacebookSteadicam operators group
- 2026تعديل اللعب في Steadicam® سلسلة الماجستير gimbal يوك والموازنة بينه وبين الـ180 درجة سلسة من دون تصاميم.موضع خلافFacebookSteadicam operators group