Maximum payload capacity and real-world weight limits of the Archer and Archer 2 sleds

المعدات

Zephyrهل أستطيع تشغيل Alexa أو RED على Zephyr؟389

Master Seriesهل يستحق جهاز Master Series مستعمل الشراء كأول جهاز كبير؟191

BFDكيف أشغّل مستقبل BFD من الكاميرا أو من الـ sled؟186

Voltهل أستطيع تركيب Volt على الـ sled أو الـ gimbal الحاليين عندي؟168

Artemisكيف أشغّل الكاميرا والإكسسوارات من sled Artemis؟166

MDRأين أركّب Preston MDR على الـ rig؟143

Modulusهل يوجد خيار HD لاسلكي من Modulus؟141

G-70هل تركّب الـ G-70 على الـ vest أو الـ gimbal أو الـ sled عندي؟126

FI+Zهل أستطيع التحكم في iris وzoom لاسلكياً وليس focus فقط؟60

HU3أين أصلح الـ HU3 أو أجدّده أو أعيد طلاءه؟60

CineLiveكيف أعبّئ جهاز CineLive وأشحنه بحقائب مناسبة للنقل؟54

G-70Xكيف يقارن الـ G-70X بـ Pro Titan وXarm وبقية الأذرع؟46

Trinity 2هل firmware الإصدار SUP 3.0 لـ Trinity 2 آمن أم فيه أعطال؟46

Ultra Vestأي vest أختار حسب مقاسي وراحتي ونوع عملي كمشغّل؟39

2012منتدى Sled

مضى على هذا 14 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.

The Archer 2 can successfully handle fully equipped Alexa camera setups including compact zoom, focus control, matte box, wireless transmitter, and monitoring equipment without issues.
An original Archer sled has been flown with Alexa including onboard battery, focus system, wireless video, and dual battery plates mounted underneath without exceeding its limits.
Maximum camera payload tested on an Archer 2 was approximately 18 kilograms with Alexa, Codex recorder, follow focus system, two motors, matte box, filters, large monitor, wireless video transmission, and dual batteries.
The smaller center post on the Archer compared to larger sleds like the XCS does not prevent it from handling heavy camera setups when properly balanced.
For lighter camera work, the Archer sleds benefit from reduced pan inertia due to the smaller post, creating a more responsive feel compared to larger diameter posts.
Weight can be strategically added to the Archer sled through monitor and battery placement on the end of support rods to increase pan inertia as needed for different shooting styles.
Motorized and manually adjustable tilt stages on Archer sleds allow operators to preset tilt angles and quickly balance for lens changes without extended setup time.

The manufacturer states a 30-pound camera weight limit, but real-world configurations typically exceed this with accessories and monitoring equipment.
Multiple operators note that optimal performance requires deliberate weight reduction by removing unnecessary brackets and selecting compact accessories.
The Archer sled is generally recommended for lighter setups; operators carrying consistently heavy rigs should consider larger sled systems.
Balance characteristics differ based on monitor and battery placement, requiring adjustment for different payload weights and shooting scenarios.