ما توصّل إليه النقاش

• The RED One camera power connector is a LEMO plug FG.2B.306.CLAD 62 Z with fats 1 and 2 carrying +12V DC andpins 3 and 4 carrying ground, and both couples should be used for reliable operation.
• ويمكن بناء كابلات الطاقة التقليدية بنجاح لربط معدات الدعم بالكاميرات مثل Steadicam sleds وأجهزة غليكام بجهاز RED1، مما يتيح للكاميرا أن تظل مثبتة في النقل أثناء تبادل البطاريات.
• When powering a RED One with hard drive from external sources, the camera can draw close to 6 amps at 14.4 volts, which may require using both the main power port and auxiliary port on supporting equipment.
• The RED One camera connector end uses standard LEMO plugs that are commercially available from electronics suppliers.
• A Y-cable configuration connecting both the main power port and auxiliary 12V power output allows hot-swapping batteries on camera support sleds without powering down the camera.
• Some RED One cameras have 6-pin connectors while others have 5-pin connectors at the camera end.

يعتمد على

• The claim about camera damage from non-official power sources was mentioned as hearsay without concrete technical explanation.
• Uncertainty exists about whether it is best to use only the main power port or both main and auxiliary ports when powering through PRO sleds.
• Some rental facilities refused to construct cables due to contradictory information they received from RED.

المعدات في هذا النقاش

BFD

المعدات أو القطع نفسها

1. 2025History of wireless focus and lens control systems for Steadicam®: from cable-based Cinema Products and Seitz to Preston digital, and European solutions by Chrosziel, cmotion, and ARRI.FacebookSteadicam operators group
2. 2018تحديد مدى استقطاب كابلات الطاقة من 2 إلىين ليمو لـ BFD و Teradek وحدةFollow Focus
3. 2018التوافق بين المشابك Bartech follow focus يدويا والنظم الرقمية للمحركاتFollow Focus
4. 2016تحديات جمع المدفوعات في خدمات استئجار المعدات وإمدادات الكابلاتLegal / Business Practices