SteadiHub
2017منتدى Sled

Glidecam X-45 sled performance, design limitations, and value assessment

ما توصّل إليه النقاش

  • The X-45 gimbal is functioning and can be balanced manually, with basic electronics consisting of 12V power connections through two-pin lemos and three HD lines.
  • ويستخدم مركب مراقبة المخزون تصميما من نوع المقص يفتقر إلى الدقة عند دعم المراقصات الثقيلة أو تركيبات المجازر.
  • وتلسكوبات معلّقة البطاريات لتحديد مواقعها، ولكنها تتطلب عملية ذات يدين أثناء التسويات المتوازنة لأن الأقفال التي تؤمّن جبال البطاريات تسيطر أيضا على توجهها الرأسي.
  • ويستخدم X-45 وظيفة مركزية غير قياسية تبلغ 1.75 بوصة تحد من التوافق مع مكونات الأطراف الثالثة مثل 1.5 بوصة gimbals، وصناديق حمار بعد السوق، وترصد الجبال.
  • ويمكن أن توفر مجموعة الماجستير المستخدَمة sleds أو أكبر سناً EFP sleds قيمة ونموذجاً أفضل من النموذج الجديد X-45، مع توفير دعم أكثر بعد السوق.
  • An alternative approach is building a sled from individual parts, which allows for modularity and future upgrades but requires more time and research.
  • Purchasers successfully paired the X-45 with the CamJam Quattro monitor bracket by obtaining a custom ring sized to the 40.8mm center post.
  • The X-45 delivers good value for its 45-pound load capacity at its price point, particularly when discounted.
  • The sled is not modular or upgradeable beyond basic component swaps.
  • Installing top-heavy camera rigs like a Ronin 2 on the X-45 can create significant weight balance challenges.

يعتمد على

  • Experience with the X-45 comes from used ownership several years before the 2017 discussion date.
  • Another contributor owned an earlier V25 model described as similar but not identical.
  • No direct comparison data provided for dovetail plate compatibility with other sled systems.
  • The attempted poor man's Trinity configuration was deemed too heavy in practice, suggesting load capacity limits may be reached with certain accessory combinations.
  • Experience limited to non-primary steadicam operations.

المعدات في هذا النقاش

Master Seriesالكتالوج

القطع

Dovetail Plate, Monitor Bracket

المعدات أو القطع نفسها

  1. 2026(أ) الانتقاء بين رفع مستوى مجموعة مواد بروفيد-2 القديمة أو الاستثمار في جهاز مهني: النهج الأول لحلقة العمل مقابل النهج الأول للمبتدئين في المعدات.موضع خلافFacebookSteadicam operators group
  2. 2026تعديل اللعب في Steadicam® سلسلة الماجستير gimbal يوك والموازنة بينه وبين الـ180 درجة سلسة من دون تصاميم.موضع خلافFacebookSteadicam operators group
  3. 2026Intry-level stabilizationr strategy on a 15,000 USD budget: Rever EVO against used Artemis 2 or M2 plus Volt, in a market with limited secondhand availability.موضع خلافFacebookThe Steadicam Group
  4. 2026قوة القصف السليم في gimbal مسامير السرج مع الكاميرات الثقيلة: خطر الإفراط في التصعيدFacebookSteadicam operators group
اقرأ النقاش الأصلياسأل عن هذا النقاشالإجابة تستشهد بالأرشيف