2018منتدى Monitors
مبلـغ الـيـوك العـام لـمراقبـي سلسلـة (أتومـوس شوغـون) في Steadicam مـع الإدخـال الاختياري لـ V-Mount بطاريات
ما توصّل إليه النقاش
- A yoke adapter can be designed to mount Atomos Shogun Flame, Inferno, and 7-inch Ninja monitors to Steadicam rigs using a SmallRig cage and V-lock assembly.
- Two design variants exist: one without V-Mount battery that blocks headphone and audio jacks, and another with a 99Wh V-Mount battery that additionally blocks the SSD port and HDMI input.
- The yoke can accommodate standard 1/4 inch and M5 threaded mounting points positioned at the center and offset distances to allow flexibility in monitor arm positioning.
- Center of gravity must be precisely located for proper balance when the yoke is mounted to a Steadicam sled.
- The SSD can be changed without disassembling the entire yoke by removing the monitor and the counterweight plate in approximately two minutes.
يعتمد على
- The design was initially created for the Atomos Shogun Flame and compatibility with Inferno and Ninja 7-inch models is not definitively confirmed.
- Port blockage is inherent to the side-plate mounting approach, making simultaneous use of multiple external connections impossible in the standard configuration.
- The prototype was tested once for center of gravity validation but long-term reliability data is not provided.
- Custom thread positioning and sizing requires case-by-case discussion and may involve customer involvement in thread installation.
- The discussion focuses on a prototype phase with production timelines measured in weeks due to part-time manufacturing and external anodizing requirements.