2013منتدى General Discussion
نقل كاميرا من Steadicam يدوياً إلى جهاز (سنريكام) مجهز بالجسد في طلقة واحدة
مضى على هذا 13 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- A lightweight stripped-down camera rig can be flown in handheld and received by an actor with carefully timed arm movements to transition from wide shot to mounted close-up without cutting.
- An electromagnetic rig designed to magnetically lock a camera onto an actor-mounted platform was considered but rejected due to cost and concerns about affecting the sensor and attracting nearby metal objects on set.
- A simplified handheld rig using a Nimblecam stripped to bare essentials proved viable for the transition when the actor's timing was precise.
- The camera transition required multiple takes with the actor holding the mounted rig steady despite its weight causing fatigue.
يعتمد على
- The final edit used jump cuts rather than showing the transition in a single continuous shot, reducing the intended impact.
- The approach required precise timing from the actor and careful coordination between the handheld operator and the receiving performer.
- This was a low-budget solution chosen specifically because specialized equipment rentals exceeded available funds.
- Electromagnetic locking mechanism was not tested for this application and raised concerns about sensor interference.