*Forgive me if this is not where marketplace for-sale items should be posted–I couldn\'t find another appropriate place.*Arri DRW-1 Wheels + Case$7,999 USDI got this planing to get the pan axis, but that didn't end up happening. Only used on 3 jobs. Has Mitchel tie down too.
Accessory for the TRINITY 2.
¿Cuánto vale el mío?Setting up DRW-1 with Trinity 2Hi all. can I confirm I\'ve got the wireless wheels setup correct in my head;Wheels (tilt and roll)2x ARRI ( KK.0051504 ) DRW-1 Digital Remote Wheel, Single Wheel SetWireless transceiver set1x ARRI ( KK.0040049 ) ERM-2400 2.4 GHz RXD-TXD Pro Set, SRHDoes the RCP-3 power the ERM-TX via its FS-CAN port? Or do we need to power the ERM-TX on its own via the 2p lemo?The RCP-3 doesn\'t accept power IN via the LBUS connectors so I only have the 2p lemo or 3p fischer connector to power it - am I correct?Using a DTAP to 2p lemo from the BMS-3 plate to power the RCP-3, I will then have no DTAPs left for the ERM-TX (unless using a DTAP from the battery itself). Is there a better power solution than using a BMS-3 plate?Mounting bracket for the RCP-3, ERM-TX, and Wheels1x ARRI ( KK.0051503 ) RCP-3, Controller, 19mm Mounting Set1x ARRI ( KK.0049408 ) BMS-3, Pro Set, V-Mount1x ARRI ( K2.0042837 ) CSS Clamp Bridge 52, 19mmMounting bracket for the ERM-RX on the Trinity 21x ARRI ( KK.0049354 ) SSB-6, Stabilizer System Bracket 6, Basic Set1x ARRI ( K2.0042837 ) CSS Clamp Bridge 52, 19mmWill the ERM-RX get power via the FS-CAN cable from the Trinity 2? Or do I need to add an extra power cable into its 2p lemo input?ANYTHING ELSE I\'M MISSING / DIDN\'T THINK OFF TO MAKE THIS SETUP WORK?Thanks all!@steadimuc the formatting tools are too basic for me to post a clean message. Would be good if we can update it a little to change font size, font colour, and font background colour 🙏
Hi everyoneI'm selling here my ARRI Wheels DRW-1 along with the Foma Systems ERM-2400 LCS kit and some cables, all packed in a Peli 1560 case. I have purchased everything in August 2022 directly from ARRI in order to use them with my TRINITY 2. This gives you the option to control the roll and the tilt axis externally by a another operator or the DP. I have used them so far only on a few occasions, hence they're in great condition. The wheels will also work with the SRH-360 EVO head when linked with the corresponding ERM kit.Setup contains:1 x Set of ARRI Wheels (2 axis control)1 x ERM-2400 LCS kit (TX, RX, 2 antennas and various cables), connectivity range of approx. 1000 m (3000 ft.)1 x CSS Mitchell Mount 1 x Peli 1560 hardcase with inlayI'm asking 11500 € EUR (if you're based in Germany +VAT), buyer pays for shipping and any occuring money transfer fees.Shoot me a message if you have any questions or want more detailed pictures.CheersOzzy