2020منتدى General Discussion
فروق القدرة على الحمولة بين Tiffen ميم-1 ومثبت M2 sleds لكاميرات السينما
ما توصّل إليه النقاش
- The M2 has a stated payload capacity of 40 pounds while the M1 can carry 50 pounds.
- ويستخدم كل من sleds نفس الآلية gimbal ولكن مع إدخالات مختلفة.
- The M2 has a smaller post diameter of 1.58 inches compared to the M1's 1.75 inches, making the M1 stiffer when fully extended, particularly with the three-post configuration.
- The M1 stage is more robust in construction than the M2 stage.
- Exceeding the stated payload capacity on either sled may result in performance degradation and increased wear on components.
- Volt system electronics can be factory-integrated into the M2 stage or added afterward if ordered separately.
- The top stage attachment mechanism is identical and interchangeable between M1 and M2 models.
يعتمد على
- Whether large cinema cameras like the Alexa 65 or Arri LF can operate comfortably at or near the M2's stated capacity was not definitively answered in the discussion.
- The practical performance differences between the sleds when carrying maximum loads were not thoroughly tested or documented by participants.
- Whether integrated Volt electronics in the M2 stage require full stage replacement for repairs was not conclusively addressed.
المعدات في هذا النقاش
القطع
المعدات أو القطع نفسها
- 2026الاحتكاك والتصوير الحاد في Tiffen gimbals مع Volt كابل طاقة: الأسباب الجذرية ومعايير القبول.موضع خلافFacebookThe Steadicam Group
- 2026الاختراع بين الموجة Volt 2 وMK-V من المستوى gimbals: الأداء في الرياح، وزن الحفرة، الصيانة، تبديل النمط.موضع خلافFacebookSteadicam operators group
- 2026Upgrading an M1 Volt gimbal from 1.5-inch to 1.75-inch center rod: insert replacement procedure and encoder ring considerations.موضع خلافFacebookSteadicam operators group
- 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rodmounts and CamJam mounts to minimize vibrationsموضع خلافSteadiHub