2009منتدى Cameras (Film/Video/HD)
Steadicam تجهيز وإعداد للتشغيل بكاميرا تصوير من طراز BL4S
مضى على هذا 17 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
موضع خلافاختلف المشاركون ولم يصلوا إلى خلاصة. اقرأ النتائج على أنها مواقف، لا إجابة.
ما توصّل إليه النقاش
- The BL4S is heavy but stable and can be flown with practice, though it requires significant physical conditioning beforehand
- إن إزالة المعالم الضوئية تنقذ حوالي 5 باوندات وتقلل من توزيع الوزن الثقيل
- وباستخدام صنبور فيديو للوزن الخفيف، مثل XC-999 أو XC-77 Sony، يمكن أن يوفر وزنا إضافيا مقارنة بالخيارات القياسية
- Low mode عملية مع BL4S هي مشكلة بسبب حمولة تحمل مقبض للكاميرا و معوقات متصاعدة، و قفص low mode قد يعرض قضايا الاهتزاز
- لوحة صعود طاولة السوشي لا تتوافق مع صنابير الفيديو المثبتة من أعلى المستويات على BL4S
- وينبغي أن يشمل التدريب أياماً للراحة من أجل منع الإصابة، وذلك باتباع مبادئ مماثلة للمبادئ المتعلقة باسترداد الوزن
- Removing the camera's standard optical viewfinder may create optical glow issues that the BL3 does not have
- The coaxial magazine design affects horizon stability during operation
- Using a clip-on matte box is recommended with Zeiss Super Speed lenses to minimize flaring
- Practicing with weight plates totaling around 60 pounds helps prepare for the actual shooting weight
يعتمد على
- The BL3 is suggested as a lighter alternative, implying the BL4S is suboptimal for Steadicam use
- One participant noted uncertainty about whether older 35mm cameras operate properly when inverted in post-production
- Information about Steadicam magazine compatibility and low mode cages comes from participants with varying levels of recent experience
- The sushi table availability and compatibility details are based on older equipment configurations
- Long takes and running shots are limited due to camera weight
القطع
المعدات أو القطع نفسها
- 2026Vest قطرة: ما الذي يُخفّض جورب الذراع يشتريه فعلاً، وما يُكلّف على القمةOperator practice
- 2026Low-mode رصد الاختيار من أجل Volt جهاز حفر الدماغ: أداء الطوارئ البالغ Transvideo Starlite مقابل البدائل الحالية.موضع خلافFacebookThe Steadicam Group
- 2026Lemo connectors on the ARRI Artemis sled: fatout, polarity verification, and powering low-mode monitors and Volt bat.FacebookSteadicam operators group
- 2026Rig setup for 180-degree immersive camera operation with Blackmagic URSA Cine Immersive: minimizing rig and monitor visibility in ultra-wide field of view.FacebookThe Steadicam Group