SteadiHub
2005منتدى Steadi-Newbies

تحقيق مستوى كاف من التطهير والكاميرا في low-mode Steadicam عملية مع SK2 sled

مضى على هذا 21 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.

ما توصّل إليه النقاش

  • Low-mode تشكيلة ذات أجهزة صمامات أقصر، تكافح من أجل تحقيق كل من ارتفاع الكاميرا وتطهيرها الكافيين بين آلة التصوير وذراع الدعم أثناء عمليات الصواعق والتموين.
  • ويؤدي إضافة الوزن إلى الشاشة أو البطارية في نهاية الـ sled إلى رفع مستوى الـ gimbal على طول هذه الوظيفة، مما يزيد من التطهير ويسمح بخفض موقع الكاميرا دون تمديد الوظيفة.
  • تباطؤ الـ drop time في low-mode يقترب الـ gimbal من الكاميرا التي ترفع ارتفاع الكاميرا ولكنها لا تحسن التطهير من الذراع.
  • وباستخدام الـ (دي) في عام low-mode مع المواقع الـ gimbal المنحرفة، يقبضون على القمة ويخلقون شكلاً غير مستقر حيث يمتد الذراع إلى الأعلى بدلاً من الاستراحة.
  • Operator footwork and body positioning are critical to low-mode success—moving the feet and sled itself prevents collisions between the rig and the arm during pans, rather than relying solely on adjustments to the rig configuration.
  • Attaching ballast weights to the SK post using the existing threaded holes or using clamps with available hardware provides a viable solution for achieving proper gimbal positioning without major modifications.

يعتمد على

  • SK2 post does not telescope, limiting one approach to gaining height.
  • Discussion centers on DSR300 camera setup and Hytron 50 batteries, which may not represent all SK2 configurations.
  • The exact attachment method for adding monitor-end weight was not definitively resolved in the thread.
  • Low-mode operation techniques remain partially dependent on operator experience and experimentation.

القطع

Low Mode

المعدات أو القطع نفسها

  1. 2026Rig setup for 180-degree immersive camera operation with Blackmagic URSA Cine Immersive: minimizing rig and monitor visibility in ultra-wide field of view.FacebookThe Steadicam Group
  2. 2026Vest قطرة: ما الذي يُخفّض جورب الذراع يشتريه فعلاً، وما يُكلّف على القمةOperator practice
  3. 2026Lemo connectors on the ARRI Artemis sled: fatout, polarity verification, and powering low-mode monitors and Volt bat.FacebookSteadicam operators group
  4. 2026الاختراع بين الموجة Volt 2 وMK-V من المستوى gimbals: الأداء في الرياح، وزن الحفرة، الصيانة، تبديل النمط.موضع خلافFacebookSteadicam operators group
اقرأ النقاش الأصلياسأل عن هذا النقاشالإجابة تستشهد بالأرشيف