2010منتدى Cameras (Film/Video/HD)
خيارات التنقل والتشكيل لـ Arri 416 كاميرا زائدة على Steadicam
مضى على هذا 16 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ما توصّل إليه النقاش
- وجسد الكاميرا يحتوي على حفرة واحدة من 3/8 بوصة 16 فناء في القاع، ولكنه أيضاً لديه فتحات دبابيس لخيارات إضافية متصاعدة.
- الحفاظ على بطارية الكاميرا على متن الطائرة خلال Steadicam عملية حفظ بطارية المشغّل gimbal في حين أن وزن الكاميرا لا يزال مناسبا ل Steadicam استخداما تحت 20 رطل مع عدسة أولية وتركيب كامل.
- ويمكن إزالة الناقل الموصل وتركيب جسم الكاميرا مباشرة إلى مجموعة قاعدية تبلغ Steadicam عند استخدام معقوف دعم الوزن الخفيف، على الرغم من أن لوحة تكيّف تجارية تبلغ steadicam تبقي سطحاً متوائماً بشكل سليم من أجل التصعيد الآمن.
- The two-piece bridge plate design allows quick-release disconnection from handheld operations by removing only the rod assembly while keeping matte box and follow focus attached.
- A spare baseplate is the minimum additional equipment needed to enable quick switching between Steadicam and handheld configurations without requiring a spare sled or bridge plate.
- The low mode bracket consists of two parts: a standard low mode bracket mounted to the camera and an upper handle section with spacers that keeps the Steadicam plate permanently attached while allowing the camera to flip for low mode operation.
- Powering auxiliary equipment like a wireless video receiver from the camera's mini-monitor connector uses a single cable and works effectively without complications.
- The lightweight support bracket with 15mm rod openings creates an uneven bottom surface that prevents direct baseplate mounting unless a dedicated Steadicam adapter plate is used to level the mounting surface.
يعتمد على
- Discussion includes some disagreement about specific terminology and mounting configurations that may be rental house specific.
- Not all rental houses may stock spare parts like additional baseplates, bridge plates, or sleds that enable the fastest configuration changes.
- The Steadicam adapter plate mentioned is a commercial third-party accessory from a German manufacturer, not standard Arri equipment.
- Experience shared is primarily from film production contexts rather than other camera types.
المعدات في هذا النقاش
القطع
المعدات أو القطع نفسها
- 2026Vest قطرة: ما الذي يُخفّض جورب الذراع يشتريه فعلاً، وما يُكلّف على القمةOperator practice
- 2026Lemo connectors on the ARRI Artemis sled: fatout, polarity verification, and powering low-mode monitors and Volt bat.FacebookSteadicam operators group
- 2026تبدل الكاميرا بين الشاحنات الثلاثية والأجهزة: أرخص ترقية لمعظم المشغلين لا تجعلOperator practice
- 2026اسحب التركيز و اقسم نفسك أثناء العمل خاصة على العروض الحيةOperator practice