ما توصّل إليه النقاش

• A 3D camera rig weighing 27 kilograms was mounted on a Steadicam worn on the body during filming, with total arm load reaching 35 kilograms including extension hardware.
• Using an offset bracket between the arm and gimbal enabled seated hard-mount configurations where the rig could be positioned around the operator's knees.
• Extended Steadicam arms required to handle loads over 18 kilograms can experience increased strain on the arm post and rod ends.
• Hard-mounting heavy rigs reduces strain compared to flying them on the arm.
• Operating concerns with heavy 3D rigs focused more on convergence adjustment complications than on weight alone.

يعتمد على

• This was an exceptional setup for specialized filming and not a standard operating approach.
• Long-term physical effects of carrying such weight were expressed as a concern but not documented.
• The specific arm models and their load capacities are mentioned informally without technical specifications.

المعدات في هذا النقاش

G-70الكتالوج

القطع

Hard Mount, Arm Post

المعدات أو القطع نفسها

1. 2026الصاروخ (ذراع الفرقة) مقابل أذرع الربيع التقليدية مثل الـ G70x: الأداء والوزن والبناء والتصميم.موضع خلافFacebookThe Steadicam Group
2. 2026Recommended upgrade priorities for a GPI Pro steadicam rigSteadi-Newbies
3. 2026Vest قطرة: ما الذي يُخفّض جورب الذراع يشتريه فعلاً، وما يُكلّف على القمةOperator practice
4. 2026شحنة Steadicam® Zephyr مع Sony FX6 إلى مركبة من خارج الطرق لنقلها مباشرة: إعداد جبل صلب وبدائلFacebookSteadicam operators group