ما توصّل إليه النقاش

• The RED camera uses a Lemo 1B-310 connector with pin 1 as ground, pin 5 as record trigger input, and pin 8 as RS232 receive data.
• The Preston camera run connector is a Lemo 2B-312 with pin 1 as ground, pin 3 and 4 carrying the run signal at 30mA maximum, and pin 9 and 10 for RS232 communication.
• A direct pin-to-pin connection approach was suggested for interfacing the two systems, with ground pins aligned.

يعتمد على

• The discussion does not provide explicit confirmation of the correct complete wiring scheme between Preston and RED connectors.
• No information about voltage compatibility or current limitations when cross-connecting systems is detailed.
• This appears to be from 2009 and may not apply to current RED camera models.

المعدات في هذا النقاش

MDR

المعدات أو القطع نفسها

1. 2026Los power on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.موضع خلافFacebookArri Artemis Trinity
2. 2025جهاز التحكم في زووم العملاء من أجل Tilta نظام نيوكليوس باستخدام Bebob من مساكن زوي و7 من طراز LEMOFacebookSteadicam operators group
3. 2024Mounting Sony Venice 2 on ARRI Trinity with SAM-0 plate: build formation and balancing strategies.FacebookArri Artemis Trinity
4. 2023Mounting Preston MDR4 focus motor and Light Ranger iris control on an ALEXA 35 on the ARRI TrinityFacebookArri Artemis Trinity