ما توصّل إليه النقاش

• Preston follow focus نظاماً يمكن أن يعمل مع محركات رقمية من مصنّعين مختلفين بما في ذلك Heden وسكوربيو، ليس فقط Preston محركات.
• The 24V booster supplies constant 24 volts to motors to maintain consistent rotation speed regardless of whether the main system is powered by less than 24 volts.
• MDR-1 follow focus units can operate on 12V power without a booster, but motors will run at reduced speed and power output.
• With a 24V booster connected, motors operate at approximately twice the speed compared to 12V operation.
• Some older 900MHz MDR-1 models had external 12-24V converter boxes, while microwave versions incorporated the voltage converter into the upper tray assembly.
• MDR-2 and microwave MDR-1 versions share the same power connector pinout.

يعتمد على

• The discussion does not specify whether all MDR models universally benefit from 24V boosters or only certain versions.
• Motor speed difference between 12V and 24V operation is described qualitatively as roughly doubled, but exact specifications are not provided.
• The age and specific hardware variant of an MDR-1 unit affects its compatibility with external boosters versus built-in converters.
• No information about whether non-Preston digital motors require additional configuration or adapters for Preston systems.

المعدات في هذا النقاش

MDR

القطع

Follow Focus

المعدات أو القطع نفسها

1. 2026Los power on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.موضع خلافFacebookArri Artemis Trinity
2. 2026اسحب التركيز و اقسم نفسك أثناء العمل خاصة على العروض الحيةOperator practice
3. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest work flow.FacebookSteadicam operators group
4. 2025جهاز التحكم في زووم العملاء من أجل Tilta نظام نيوكليوس باستخدام Bebob من مساكن زوي و7 من طراز LEMOFacebookSteadicam operators group