SteadiHub
2009منتدى Brackets/Widgets

19 ملم معدّل دعم معقوفة لـ XCS لوحة مع تعديل موقعها

مضى على هذا 17 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.

ما توصّل إليه النقاش

  • ويمكن تصميم معقوفتين معقوفتين بحيث يُلحقان دعماً لعدسات عيار 19 ملم مباشرة بطبقة من طراز XCS، ويلغيان الحاجة إلى جسر منفصل ولوحات قاعدية.
  • The bracket features adjustable 19mm aluminum bars that can be repositioned vertically and horizontally to accommodate different lens support placements relative to the camera.
  • The 15mm rods that mount into the plate are approximately 75mm in length and can extend outward by roughly 1.5 inches for variable reach.
  • When socket screws are tightened securely, the bracket remains rigid enough for motorized lens support applications, especially when braced by an actual lens support bracket.
  • The bracket can be configured with multiple bar lengths by using interchangeable sets that take seconds to swap, allowing adaptation to different lens sizes and support requirements.
  • This type of bracket proves useful for supporting anamorphic lenses and can be incorporated into larger camera rigs including matte boxes and focus systems.
  • A kit configuration with different bar lengths and a spacing plate can keep the connection flush to the front of the dovetail.

يعتمد على

  • Design is specific to XCS plates and their dovetail mounting system.
  • Aluminum bars offer less strength than steel alternatives, though the bracket is intended to be partially supported by an actual lens support bracket during use.
  • Production manufacturing proved cost-prohibitive when quoted, limiting commercial availability.
  • Effectiveness depends on the lens support bracket being used simultaneously to provide lateral bracing and eliminate bar deflection.

القطع

Base Plate

المعدات أو القطع نفسها

  1. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest work flow.FacebookSteadicam operators group
  2. 2026تشغيل Steadicam® Zephyr دون Volt: drop time، مراقبة الأفق، وتأثير توزيع الوزن الأعلى على التوازن.موضع خلافFacebookSteadicam operators group
  3. 2026تبدل الكاميرا بين الشاحنات الثلاثية والأجهزة: أرخص ترقية لمعظم المشغلين لا تجعلOperator practice
  4. 2026لوحات تكييف الكاميرات ونظم تركيب المثبتات لإبقاءها في مجموعة مواد مشغلةGeneral Discussion
اقرأ النقاش الأصلياسأل عن هذا النقاشالإجابة تستشهد بالأرشيف