SteadiHub
2011منتدى Steadi-Newbies

تشغيل Arri 435 كاميرا للأفلام في steadicam مع قيود على الطاقة والمعدات

مضى على هذا 15 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.

ما توصّل إليه النقاش

  • The Arri 435 requires 24 volt power while many steadicam rigs supply only 12 volts, necessitating an external batlt or converter solution.
  • إن إزالة جهاز العيون والفيديو من الـ Arri 435 يقلل وزن الكاميرا، وهو أمر مفيد عند حمل الكاميرا على جهاز حاسبة رقم steadicam.
  • أعلى فيديو بنسبة 100% للـ Arri 435 يجعل الكاميرا أخف وأضيق، ويمكّن من تشغيل low-mode بدون هياكل قفصية إضافية.
  • The Arri 435 requires specific steadicam magazines that allow film to move spiritually rather than horizontally, maintaining camera balance throughout a shot.
  • A clip-on mattebox reduces overall camera weight compared to using a sliding baseplate with support rods.
  • The Arri 3 is an older alternative that runs on 12 volt power, potentially eliminating the need for an external batlt, but has inferior video optics and viewing system compared to the 435.
  • Carrying a battery belt yourself provides better control over power management during steadicam operation than relying on an assistant to follow with the power source.
  • An upgraded EFP rig with a 3-arm system may not be optimally designed for heavier film cameras, potentially affecting drop time and handling.

يعتمد على

  • Advice applies specifically to the Arri 435 and Arri 3 cameras.
  • The Arri 3 option depends on availability at the rental house and may require sourcing specialized accessories like low-mode brackets and eyepiece video taps from individual operators.
  • Using Arri 3 at frame rates above 50 fps requires a second discrete 12 volt power source, potentially negating its advantage over the 435.
  • The discussion centered on a specific low-budget student film production and may not reflect practices on fully-funded productions.
  • Advice regarding EFP rig suitability for heavier cameras was based on general design principles and the specific operator's configuration.

القطع

Dovetail Plate, Low Mode, Base Plate

المعدات أو القطع نفسها

  1. 2026Vest قطرة: ما الذي يُخفّض جورب الذراع يشتريه فعلاً، وما يُكلّف على القمةOperator practice
  2. 2026القضاء على الاهتزاز مع ARRI ALEXA 35 في Steadicam®: خيارات الرفع الصلب للطبقات لتجاوز نظام dovetailFacebookThe Steadicam Group
  3. 2026Lemo connectors on the ARRI Artemis sled: fatout, polarity verification, and powering low-mode monitors and Volt bat.FacebookSteadicam operators group
  4. 2026تبدل الكاميرا بين الشاحنات الثلاثية والأجهزة: أرخص ترقية لمعظم المشغلين لا تجعلOperator practice
اقرأ النقاش الأصلياسأل عن هذا النقاشالإجابة تستشهد بالأرشيف