ما توصّل إليه النقاش

• A dovetail-mounted weight plate system allows operators to add 0.8 to 1.65 pounds of additional weight to the bottom of cinema sleds, enabling the use of shorter posts while maintaining balance.
• The weight plate can be positioned anywhere within a 5-inch range along the dovetail for fine-tuning balance characteristics.
• The system was developed through 7 months of prototyping and testing before public release.
• Adding weight to the sled bottom permits extended top posts in low-mode operation without extending bottom posts.
• The weight plate can be tapped to accept a 3/8-inch 16-thread gyroscope mount.
• Battery plate variations with pre-drilled holes for IDX or Anton Bauer batteries allow operators to use battery weight as functional counterbalance.
• The base aluminum plate weighs approximately 1.0 pound and remains functional without additional weight plates for lighter balance needs.

يعتمد على

• Designed specifically for Tiffen full-size sleds with dovetail bottoms (Ultra2, Original Ultra Cine series, Vector, Clipper series).
• User experience limited to main weight plate and weight number one; weights two and three were not extensively field-tested by the reviewer.
• Practical benefit noted primarily for professional aerial and motion control work rather than consumer-level productions.

القطع

Low Mode

المعدات أو القطع نفسها

1. 2026Vest قطرة: ما الذي يُخفّض جورب الذراع يشتريه فعلاً، وما يُكلّف على القمةOperator practice
2. 2026Low-mode رصد الاختيار من أجل Volt جهاز حفر الدماغ: أداء الطوارئ البالغ Transvideo Starlite مقابل البدائل الحالية.موضع خلافFacebookThe Steadicam Group
3. 2026Lemo connectors on the ARRI Artemis sled: fatout, polarity verification, and powering low-mode monitors and Volt bat.FacebookSteadicam operators group
4. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rodmounts and CamJam mounts to minimize vibrationsموضع خلافSteadiHub